High Pressure Pump for Cold Water. For use with the Bristle Blaster Subsea.

This electrical unit provides reliability combined with a long service life. Several hundred hours of reliability and service life per year is very important. All components used are designed for a long service life.

For example, the pumps operate with very little wear thanks to the low-speed crankshaft principle of 1450 rpm.

The Monti Cleantech Subsea Bristle Blaster offers a complete surface preparation package for all your underwater and splash zone surface preparation work.

One of the first hand-held surface profiling tools to create an anchor profile underwater, it delivers a surface which is dense, regular and angular, ready for the mechanical bonding of protective materials.

This technology features a powerful and servable water motor that enables a clean and powerful source to drive the unit. It is sustainable and environmental friendly.

The tool applies Monti’s patented Bristle Blaster technology which is capable of generating a cleanliness grade comparable with SA 2.5 – 3 per ISO 8501-1 without the use of loose abrasives.

• Removes corrosion, coatings, scale and adhesive residues underwater and in the splash zone
  
  
• Minimal loss of base material
  
  
• Roughness level up to 120 µm Rz in the splash zone and up to 50 µm Rz subsea
  
  
• Surface preparation grade comparable with SA 2.5 – 3 (ISO 8501-1)
  
  
• Torque and speed adjustable with high-pressure unit

MontiPower TS 21/250 Professional High Pressure Pump for Cold Water Features:

- Pressure relief valve with bypass extreme

 - Flexible motor-pump coupling

 - Premium pumps with three built-in ceramic pistons and brass pump head

 - High-performance filter cartridge with self-priming filter

 - Pressure gauge in stainless steel housing

 - 4-pole motor 50Hz (1400 U / min), generously dimensioned and with special coating

 - High-pressure valve with external bypass

 - Flexible motor-pump coupling

 - Low voltage control panel

 - Protection against overheating

 - Motor with thermal protection

 - A flow switch for no-water control

All subsea equipment and underwater tools to power the subsea unit and deliver underwater surface preparation results are available separately, including:

 - Bristle Blaster Belts, Subsea. 4 Caged Belts (BB-500-04)

 - Bristle Blaster Belts, Subsea. 8 Caged Belts (BB-500-08)

 - 1/2" Neutrally Buoyant High Pressure Hose (W.P. 390 bar) - 50 mtr

 - ARF070 Nipple M24 700 Bar G1/2M

 - GR200 Vacuum Adapter set for debris transportation (Max. tool diameter 160mm)

 - MontiPower TS 21/150 professional High Pressure Pump for cold water (HPCT 250-21)

 - ARF70 3P M24 Quick connect couple G1/4M S/S - W.P. 700 bar

 - 1/2" Rubber High Pressure Hose (W.P. 440 bar) - 25 mtr

 - Waterhydraulic Propeller Polisher with Vacuum Adapter for debris transportation (PP200T1)

 - 1/2" Rubber High Pressure Hose (W.P. 440 bar) - 50 mtr

 - Electrical High Pressure Unit - 44lpm @ 400Bar. Frequency Controlled (HDE30-400-37PRO)

 - Connector plate Subsea tools

 - Subsea ToolHose 2m 1/4"

 - MONTI Easy-lock 23mm

 - MONTI Easy-lock double (36307)

 - 1 /2″ Neutrally Buoyant High Pressure Hose (W.P. 390 bar) – 30 mtr

 - Electric water supply pump set 230V (with 10 meter 1 inch hose- GK-GK)

 - MontiPower TS 30/280 professional high pressure pump for cold water (HDMP280_30)

 - Waterhydraulic Underwater Grinder

 - ROV Zero-thrust Cavitation Cleaning Lance (Max. 80 LPM at 300 bar)

 - Short Cavitation Cleaning gun (Max. 90Nm)

 - Zero-Thrust Long Cavitation Cleaning gun (Max. 40 LPM at 300 bar)

 - Zero-Thrust Short Cavitation Cleaning gun (Recommended max. 40 LPM at 150 bar)

 - Diesel High Pressure Unit- 31lpm @ 300Bar. (HPCT DFC 27.3/300)