Grooved profile wheel Ø80×40 mm – Polyamide 6G for 40 mm aluminum profile

Compatibility: Suitable for 40 mm aluminum profile systems, including compatibility with profiles from item®, Fath®, and Bosch Rexroth® (slot width 6 / 8 / 10 / 12 mm, depending on the variant).

The Ø80×40 mm grooved profile wheel made of Polyamide 6G is specially designed for precise guidance in 40 mm aluminum profiles – for shelves, material trolleys, workbenches or linear axes that need to be moved smoothly and with minimal play. The groove geometry engages positively with the aluminum profile, enabling quiet linear movement without additional guide elements. More application examples can be found on our solution page for conveyor technology and mechanical engineering.

Bearing designs

The grooved profile wheel is available in three variants:

• With ball bearing: Double-sealed deep groove ball bearing made of steel – low maintenance, mountable directly on an axle or bolt, for rotating wheels.
• With stainless steel ball bearing: Same as the ball bearing version, but with a stainless steel ball bearing for damp or corrosive environments.
• With hub keyway: Torsion-resistant shaft connection according to DIN 6885 – for driven wheels or when the wheel needs to be firmly connected to the shaft.

Technical features

• Outer diameter: 80 mm
• Wheel width: 40 mm
• Hub length: 40 mm
• Bore: Ø8 mm
• Running width: 7.8 mm
• Groove width: 8 mm
• Load capacity: 220 kg
• Suitable for: 40 mm aluminum profile (item®, Fath®, Bosch Rexroth®, among others)
• Material: Polyamide 6G (PA6G), cast and turned
• Electrically non-conductive, food-grade

Areas of application

• Shelves and storage systems with linear guidance
• Material trolleys and mobile workbenches
• Linear axes in special machines and fixtures
• Assembly systems with profile rail systems (item®, Fath®, Bosch Rexroth®)
• Intralogistics and light conveyor technology

Notes

Please check the profile groove dimensions and axle diameter before ordering. For the keyway hub version, DIN 6885 applies – suitable keyway dimensions can be found in the technical data. Special dimensions available on request.

Brand information / Compatibility note

item®, Fath® and Bosch Rexroth® are registered trademarks of their respective owners. The grooved profile wheels offered on this page are not original products from these manufacturers, but compatible accessories. The brand names are mentioned solely to describe compatibility.