Kramer TP-780TXR 4K60 HDMI HDCP PoE HDBaseT Transmitter with Ethernet

TP?780TXR is a high-performance , HDBaseT twisted pair transmitter for 4K@60Hz (4:2:0), 2Kx4K HDMI, Ethernet, bidirectional RS?232, IR signals and PoE. The TP?780TXR inputs HDMI, Ethernet, RS?232, and IR signals and converts them into an HDBaseT twisted pair signal that it transmits to a TP?780RXR receiver. The TP?780TXR provides power remotely over Ethernet to the TP?780RXR in places where an external power supply is difficult to reach. The result is that a single HDBaseT LAN cable can provide both data and power to compatible devices.

Key Features

• Reach Extension Up to 100m (330ft) at 4K @60Hz (4:2:0); up to 130m (430ft) at full HD (1080p @60Hz 36bpp); up to 180m (590ft) at HDBaseT ultra mode and full HD (1080p @60Hz 24bpp), when using Kramer HDBaseT cables.
• Transmitted Data Bandwidth Up to 10.2Gbps (3.4Gbps per graphic channel).
• Transmitter Compliance Complies with HDBaseT receiver.
• Video Resolution Up to 4K@60Hz (4:2:0) 24bpp.
• HDMI Signal Transmission HDMI 2.0 and HDCP 2.2 compliant signal, supporting deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTSHD, CEC, Full HD, 2K, 4K, and 3D.
• Multichannel Audio Transmission Up to 32 channels of digital stereo uncompressed signals for supporting surround sound at studio level.
• EDID and CEC Pass Through Passes EDID and CEC signals from the source to the display.
• Ethernet Transmission Ethernet interface data flows in both directions to allow extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
• Bidirectional RS-232 Transmission Serial interface data flows in both directions to allow data transmission and device control.
• Bidirectional Infrared Transmission IR interface data flows in both directions to allow remote control of peripheral devices located at either end of the extended line.

Technical Specifications

INPUTS
1 HDMI connector
OUTPUTS
1 twisted pair RJ-45 connector
PORTS
1 IR on a 3.5mm mini jack, 1 RS-232 on a 9pin Dsub connector
MAX. DATA RATE
10.2Gbps (3.4Gbps per graphic channel)
RS-232 BAUD RATE
115200
COMPLIANCE WITH HDMI STANDARD
Supports HDMI and HDCP
POWER CONSUMPTION
48V DC, 280mA
OPERATING TEMPERATURE
0° to 40°C (32° to 104°F)
STORAGE TEMPERATURE
-40° to +70°C (-40° to 158°F)
HUMIDITY
10% to 90%, RHL noncondensing
INCLUDED ACCESSORIES
Power supply 48V/1.36A, bracket installation kit
OPTIONS
RKT2B 19” rack mount, Kramer external IR sensor (P/N: 95-0104050), Kramer IR emitter cable (P/N: CA35/IRE-10)
PRODUCT DIMENSION
18.75cm x 11.50cm x 2.54cm (7.38" x 4.53" x 1.00" ) W, D, H
PRODUCT WEIGHT
0.4kg (0.9lbs) approx
SHIPPING DIMENSION
34.50cm x 16.50cm x 5.20cm (13.58" x 6.50" x 2.05" ) W, D, H
SHIPPING WEIGHT
1.0kg (2.2lbs) approx