HRSMXL5T-FK/HRSMX5T-FK
Ball Width 0.813 in.
22 Degrees of Misalignment
Radial Load Capacity 11,781 LBS

HRSMXL6T-FK/HRSMX6T-FK
Ball Width 0.813 in.
22 Degrees of Misalignment
Radial Load Capacity 11,781 LBS

HRSMXL7T-FK/HRSMX7T-FK
Ball Width 0.875 in.
21 Degrees of Misalignment
Radial Load Capacity 17,105 LBS

HRSMXL8T-FK/HRSMX8T-FK
Ball Width 0.937 in.
19 Degrees of Misalignment
Radial Load Capacity 23,720 LBS

HRSMXL10T-FK/HRSMX10T-FK
Ball Width 1.200 in.
19 Degrees of Misalignment
Radial Load Capacity 32,067 LBS

High Misalignment Series (Chromoly)

These special high misalignment rod ends are based on the Heavy Duty Chromoly rod ends and feature large body and threaded shank with a special ball with shoulders. Three piece construction, with body, ball and race. This type of construction allows for the use of different metals for each component part. The body is manufactured out of 4130 steel alloy, which is heat treated, and zinc plated. Specifications for the race are heat treated alloy steel, zinc plated, and chromate treated materials. The special ball is made from 52100 steel (AMS-7440) and is heat treated, and hard chrome plated and also includes built in shoulders, providing additional misalignment without the use of spacers. The durable Teflon liner provides additional wear resistance.

These loads are based upon the minimal mechanical properties of the design configuration of the stressed areas. The Operation Load Capacity of FK Bearing rod ends is based upon the Radial Static Load Rating. Appropriate safety factors should be utilized with the application. Full rotation assemblies up to 100 rpm should not exceed 10% of the radial static load.

What is Axial Load Capacity?

Axial static load is the force that is applied through the bore of the ball. Maximum axial static load capacity is recommended at 15% of the radial static load for FK Bearing two piece rod ends, 10% for three piece rod ends.

What is Bearing Misalignment?

A rod end or spherical bearings ability to mis-align is measured by the degree of angle the ball can accommodate without interference.