Dovetail red dot sight mount mount for the CZ Shadow 2. Compatible with Leupold Delta Point Pro and other Shield RMR/SMS footprint red dot sights, such as the Holosun 407K/507K, Shield RMS/RMSc/SMS, Sig Romeo Zero, Vortex Defender and many more. Mounting hardware is included.

Compatibility

• CZ 75 Shadow
• CZ 75 SP01 Shadow
• CZ Shadow 2
• Dan Wesson DWX
• Dan Wesson DWX Compact

Does NOT fit

• Shadow 2 Optics Ready
• Shadow 2 Kadet

Specifications

• Material: 7075 Aluminum
• Coating: Matte Black Hardcoat
• Overall Length: 1.604"
• Overall Width: .99"
• Torque Specs: 15 in/lbs

Mounting Hardware (included)

• (2) 6-32 Button Head Screws
• (1) 6-32 X 3/16 Set Screw

Compatible red dot sights (list is not exclusive)

• Bushnell RXS-100
• Bushnell RXS-250
• Bushnell RXU-200
• Crimson Trace CTS-1500
• Holosun 407K*
• Holosun 507K*
• Jpoint
• Leupold DeltaPoint Pro
• Optima
• Redfield Accelerator
• Shield RMS
• Shield RMSc
• Shield SMS
• Sig Romeo Zero
• Vortex Defender-CCW

* With modification. The rear two locater pins on the plate must be filed off in order to allow the 407K/507K to fit.

Installation

EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with the adapter plate in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time.

• Remove the rear sight*
• Install the EGW Sight Mount in the dovetail
• Tighten set screw (if applicable)
• Place the red dot sight on the EGW Sight Mount (Tip: A small piece of paper between the red dot sight and the mount will make for easier removal and will keep Loctite off of the red dot sight.)
• Apply blue Loctite #242 threadlocker to the provided mounting screws
• Torque mounting screws to 15in/lbs